Referências

Bases de dados Federadas

Federated Database System

A federated architecture for information management, ACM Transactions on Information Systems, Volume 3 Issue 3, July 1985 Pages 253-278

EDINA

EDINA is a national academic data centre based at the University of Edinburgh.
Site oficial

Serviços Geoespaciais da EDINA:

Iniciativas/Propostas de padronização de dados científicos

BioTorrents: A File Sharing Service for Scientific Data

Site oficial

Publicação no PLOSONE - BioTorrents

Bancos de dados científicos

  • PANGAEA
    The information system PANGAEA is operated as an Open Access library aimed at archiving, publishing and distributing georeferenced data from earth system research. The system guarantees long-term availability of its content through a commitment of the operating institutions.
  • The Data Hub
    the Data Hub is a community-run catalogue of useful sets of data on the Internet.
  • Dryad
    Dryad is an international repository of data underlying peer-reviewed articles in the basic and applied biosciences
  • Figshare
    figshare allows researchers to publish all of their research outputs in seconds in an easily citable, sharable and discoverable manner. All file formats can be published
  • Data Observation Network
    Data Observation Network for Earth (DataONE) is the foundation of new innovative environmental science through a distributed framework and sustainable cyberinfrastructure that meets the needs of science and society for open, persistent, robust, and secure access to well-described and easily discovered Earth observational data.

Qualidade do Ar

AirBase: public air quality database

Iniciativa da European Environment Agency (EEA)
Site oficial

Air Quality egg -- Wiki do projeto

Air Casting

UK-AIR: Air Information Resource

Smart Citizen

Citizen Sensor

Discomap - EEA

Discomap is a website for developers and gis experts to allow re-use of our map-services.
Any map services here is exposed for public users by EEA or any other website who might be interested to do so.

Banco de dados do INPE

Sistema Nacional de Dados Ambientais

Programa Cidadão de Observação Climática (EUA): Citizen Weather Observer Program

"Site oficial:http://www.wxqa.com/

The Citizen Weather Observer Program (CWOP) is a public-private partnership with three main goals: 1) to collect weather data contributed by citizens; 2) to make these data available for weather services and homeland security; and 3) to provide feedback to the data contributors so that they have the tools to check and improve their data quality. In fact, the web address, wxqa.com, stands for weather quality assurance.

Open Knowledge Foundation: Grupo de Trabalho Climático e Ambiental

Grupo de Trabalho em Ciência do Clima da OKFN
Grupos de Trabalho da OKFN

For background information, here are a few links related to our
previous work in this area:

http://blog.okfn.org/2007/11/20/the-ipcc-data-distribution-centre-environmental-data-licensing/
http://blog.okfn.org/2009/12/05/climate-change-climate-sceptics-and-open-data/
http://blog.okfn.org/2010/01/28/clear-climate-code-and-data/
http://blog.okfn.org/2010/02/24/a-tour-of-climate-data-at-ckan/
http://wiki.okfn.org/Open_Environmental_Data
http://wiki.okfn.org/Open_Environmental_Data/Policy
http://lists.okfn.org/pipermail/open-science/2009-December/000133.html
http://thedatahub.org/group/climatedata

Teses e Laboratórios de Referência

Tese de Doutorado: Estudo do Balanço de Energia na Superfície da Cidade de São Paulo
Autor: Maurício Jonas Ferreira - Ano: 2010
Fonte: USP

Laboratório de Conforto Ambiental e Eficiência Energética do Departamento de Tecnologia (Labaut)
Notícia no site da USP

Lojas e estações comerciais

Ambient Weather

Alden Weather Systems

Estação meteorológica com Arduino - LabdeGaragem

http://labdegaragem.com/forum/topics/esta-o-meteorol-gica-c-arduino

Produtos da Sparkfun

USB Weather Board
Weather Meters

Comparação de dados

Monitoramento do volume de chuva de Porto Alegre pelo projeto Metroclima

Exemplos de bancos de dados

Plataformas de Coletas de Dados do Sistema Nacional de Dados Ambientais, incluindo consulta a bancos de dados meteorológicos.

Modelos 3D para impressão de peças

Pluviômetro

Parte de projeto 3Dkanjers disponível por Creative Commons -- BY-NC-SA

Thingiverse: Pluviometer by Yoctopuce: These are the plastic parts needed to build a automatic pluviometer. When used with a Yocto-Knob this thing will allow to find out if the weather is as bad you think it is.

Thingiverse: Rain meter by Proton: This is a parametric design of an electronic rain meter.

Anemômetro

Thingiverse: Weather station by femoral: Early development state of a weather station you can print with your 3D printer.

Thingiverse: Dallas 1 Wire Weather Replacement Parts by kb0nly.

Thingiverse: Wind direction anemometer by neovista49. (Somente direção do vento).

Thingiverse: Mini- wind gauge: mini-wind gauge for every corner of my shed.

Thingiverse: wind gauge: simple wind gauge for my shed sits on 10mm stick,pole I just used super glue & it has not stop spinning for 3 weeks. (Somente direção do vento).

Thingiverse: Wind vane: These are the plastic parts needed to build a wind vane. When used with a Yocto-Knob this thing will give you wind direction through USB.

Thingiverse: Anemometer: Anemometer: allows you the estimate wind speed though USB when used with a Yocto-Knob.

Abrigo de proteção para sensores de temperatura e umidade do ar

Thingiverse: Stevenson screen for wireless meteorological sensor: A Stevenson screen is an outdoor shelter for your meteorological sensors, such as those that come along with your electronic home weather station.

Thingiverse: Stevenson screen for weather station: This is a Stevenson screen like cap for a thermometer inside a 6 mm carbon rod (as used for kites).

Thingiverse: Vented and shaded box for outdoor temp and humidity sensors: a box to keep the worst of the sun and rain off of a temp/humidity sensor while still letting enough air to circulate so that you get a reasonable reading.

Thingiverse: MySensors Mini Weather Station: This is a case for a mini weather station for MySensors and other IoT. It has room for a 70x50mm prototype board and a 9v battery.

Thingiverse: Fan Ventilated Air Temperature Shield 04: A ventilated shield for measuring outdoor air temperature and humidity (e.g., on a weather station).

Suporte para os equipamentos

Thingiverse: Weather Station Bracket: Due to an unfortunate flying tent incident last year, the station got ripped off the mounting brackets, so I figured I'd have a bash at designing a new one and printing it with the UP!

Guias para medidas de erros e incertezas

GUM (Guide to the Expression of Uncertainty in Measurements), publicado pelo Joint Commitee for Guides in Metrology: Edição 2008 (em inglês); edição brasileira 2008 (Guia para a Expressão da Incerteza de Medição).

Guias e manuais da Organização Meteorológica Mundial (OMM)

Página de manuais da OMM

Guia para instrumentos meteorológicos e métodos de observação

Siting and Exposure of Meteorological Instruments

Initial Guidance to Obtain Representative Meteorological Observations at Urban Sites

Guia para o Sistema Mundial de Observação

Guia para práticas de serviços meteorológicos públicos

Guia para práticas climatológicas

Ferreira_2010-ESTUDO_DO_BALANCO_DE_ENERGIA_NA_SUPERFICIE_DA_CIDADE_DE_SP.pdf - Tese de Maurício Ferreira - 2010 - Balanço Energético da Superfície da Cidade de SP (Doutorado) (2 MB) Rafael Pezzi, 18/06/2012 18:09